| |
ToxiPro- CO,CO+,CO-H,H2S,SO2,NH3,PH3,HCN
|
Version
|
7.90A
|
|
Posted
|
2007 SEPT 19
|
Size
|
32 kB
|
Type
|
Binary Flash
|
|
|
| |
|
| |
|
|
Version
|
|
 |
Posted
|
|
Size
|
|
Type
|
|
|
Corrects issue with saving calibration data for units
that are configured to not be able to turn off.
|
|
| |
|
|
| |
|
|
| |
Comments
|
To upgrade your instrument with a new firmware flash you must use the Flash Upload
utility software.
The ToxiPro requires the use of IrDA communication to upload the
firmware flash.
Note: O2, Cl2, ClO2, NO2 versions of the ToxiPro uses a different
firmware. See link above.
If an incorrect firmware version is installed the instrument
will display fault #7 (F 7), incorrect sensor version. To
reload the correct version simply repeat the procedure and
select the correct firmware flash type.
For detailed
instructions on uploading a new flash into any of our instruments, click here. |
| |
|
|
ToxiPro